The Autonerdz Community Forums
https://www.autonerdz.com/cgi/yabb2/YaBB.pl
General Public Area >> Introductions >> New user
https://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1357427230

Message started by Kostas GR on Jan 5th, 2013 at 3:07pm

Title: New user
Post by Kostas GR on Jan 5th, 2013 at 3:07pm
Hello from Greece, i have a workshop with motorcycles and i am a very new user of pico. I have it 5 days now and already save me for a lots of problems and time. The forum was very useful with a lot of information's, i am study for pico only one month and i have find that is very easy to use.
How i get more access in others topic's and i am interesting for motorcycles. I attach my first waveform from a Kawasaki ZX-10R 2008. 
Many Thanks
Kostas Boutos   
Boutos R&D Workshop
Sychro_zx10r.jpg (121 KB | )

Title: Re: New user
Post by top4 on Jan 5th, 2013 at 5:06pm
  Welcome in and best of luck! :D

Title: Re: New user
Post by RtOne on Jan 5th, 2013 at 6:09pm
Looks like your a natural with it already, good work. Welcome Aboard.

Kostas GR wrote on Jan 5th, 2013 at 3:07pm:
How i get more access in others topic's

If your asking about access to the Picogroup section of the website, that would be an annual subscription, that I'm sure Tom, or Brian will get you a link in this thread to help explain it.

Title: Re: New user
Post by Mick on Jan 5th, 2013 at 9:26pm

Kostas GR wrote on Jan 5th, 2013 at 3:07pm:
I attach my first waveform from a Kawasaki ZX-10R 2008. 


Welcome Kostas

I would like to see the psdata file for that compression wave you have posted could you attach it here please.

Title: Re: New user
Post by Daniel on Jan 6th, 2013 at 5:30am
Hello Kostas.
Welcome to the forum.  :)

I’m a bit in to motorcycles too. Just post up some files/problems, and I’ll see if I can help you.  :)

Been to Greece many times, great country to visit.  8-)

Like me, I was stupid enough, not to buy the scope from Tom, but now I pay an annual subscription to be a part of the Picogroup, but it’s all worth it.  :)

Title: Re: New user
Post by Kostas GR on Jan 6th, 2013 at 6:14am

Mick wrote on Jan 5th, 2013 at 9:26pm:

Kostas GR wrote on Jan 5th, 2013 at 3:07pm:
I attach my first waveform from a Kawasaki ZX-10R 2008. 


Welcome Kostas

I would like to see the psdata file for that compression wave you have posted could you attach it here please.


Hi,
I attach the file of psdata.

https://www.autonerdz.com/cgi/yabb2/YaBB.pl?action=downloadfile;file=ZX-10R_SYNCHO_CYL_1.psdata (8891 KB | )

Title: Re: New user
Post by Mick on Jan 6th, 2013 at 7:25am
Thank you Kostas

I don't know much about high performance 4 cylinder 998 cc bike engines, but is that intake cam supposed to be that much retarded?
high_performance_bike_engine_compression_wave.jpg (801 KB | )

Title: Re: New user
Post by Tom Roberts on Jan 6th, 2013 at 7:38am

Welcome, Kostas.  Enjoy the forums.   :)



RtOne wrote on Jan 5th, 2013 at 6:09pm:
I'm sure Tom, or Brian will get you a link in this thread to help explain it.
           


http://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1336513824

The Picogroup section of the forums is only one part of the comprehensive Picogroup resources.  These resources come bundled with any Autonerdz PicoScope kit but are also available by annual subscription.

Title: Re: New user
Post by RtOne on Jan 6th, 2013 at 10:25am
Kostas, would you post your file down in the General Technical Discussion Forum?  I think Mick has an itch to teach us something. (Help Us Learn) In my experience He's good at that.


Mick wrote on Jan 6th, 2013 at 7:25am:
I don't know much about high performance 4 cylinder 998 cc bike engines, but


Mick if Kostas is kind enough to post this down there or allow me to, would you Paint up a JPG for us? I see a lean in the Compression, but thought the Exhaust was opening early instead of the Intake late.  But you know, I don't know.

Title: Re: New user
Post by Mick on Jan 6th, 2013 at 12:29pm

RtOne wrote on Jan 6th, 2013 at 10:25am:
Kostas, would you post your file down in the General Technical Discussion Forum?  I think Mick has an itch to teach us something. (Help Us Learn) In my experience He's good at that.


In the end I think Daniel will be giving both of us a lesson on this performance engine. :)

Title: Re: New user
Post by Kostas GR on Jan 6th, 2013 at 2:43pm
Hi, let starts the lessons i will be very glad.
For the story, this bike have some modifications in the engine and ecu, it is a race bike only, no in road use, the engine has modified from another shop, and it came in the last months and now i support technical and in the race tracks. Spec of engine: crankshaft and pistons are stock, head has been lower to have more compression and i do not know exactly the ratio they have told me 14.6:1, have reprofiled camshafts, company recommended timing inlet 110 center and exhaust 110, i do not know where the have timing the cams and i do not know the durations. The problem with the bike was in ecu and we replaced with a programmable ecu. when i install the new ecu i had problem with the second and the third cylinder with the new one. in that time i bought the pico (very nice and good tool, i think the best i have bought in the last few year after my superflow bench). I will attach the jpg from the problem with the injectors i had. I want strongly to learn if i can see the exact timing of camshafts with the pico if this is possible.
Thanks and sorry for my english is not perfect.
Kostas
P.s. Because i am not very familiar with forums you can forward in another topic is you want.
Ignition_zx-10r.jpg (93 KB | )
Injectors_zx-10r.jpg (95 KB | )

Title: Re: New user
Post by Kostas GR on Jan 6th, 2013 at 2:47pm
the bike in the dyno have 167 true rear wheel hp in my dyno. around 200 hp in crankshaft.

Title: Re: New user
Post by RtOne on Jan 6th, 2013 at 5:46pm
WOW That be some serious Horse Power, My ole Softail probably ain't got a third of that left in her.

I'll see what (How) Tom wants to do with the already good information Kostas has posted.

Don't sweat the English Kostas, you'll see I don't quite have it down pat either. It's only been 60 years! :-[

Title: Re: New user
Post by Kostas GR on Jan 6th, 2013 at 11:28pm
the number of the dyno is not absolute correct, today that i went to the store i check the last dyno of this bike and i post the dyno chart.
zx-10r_dyno.jpg (186 KB | )

The Autonerdz Community Forums » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.