lets see

---

Mick wrote on Dec 10^th, 2013 at 7:32pm:

lets see

spill the beans... I'll bite

Spence wrote on Dec 10^th, 2013 at 8:46pm:

Mick wrote on Dec 10th, 2013 at 7:32pm: lets see spill the beans... I'll bite

That was a GMC safari 4.3 W  the other shop had put a MAF on it to try to cure the low power under load.

The Y pipe leads into one and there is a pre cat and then a main cat, after telling them it needs a cat they asked which one is restricted,  I proved the rear one by attaching pressure gauges one before front cat and then another between both cats.

If it was only the front cat restricted the left pressure gauge would have been the only one showing the high pressure.


EDIT

Added a better and smaller video file

---

somebody got an early Xmas present  ;D

daveyK wrote on Dec 11^th, 2013 at 1:13pm:

somebody got an early Xmas present  ;D

Everything you see is as old as the difference in age between you and me. :P No wait you and Spence.

Its Rods addition to the Case Study Wizard program thats new, :)

Even the boot in the video is old, Spence needs to take a look at that one for size.

Mick,

are talking about new toys, old shoes, or old timers??

I'm easily confused these days  [smiley=Grandpa_Angry.gif]

I can't wait for your new posts with videos, that'll make for some   [smiley=huh2.gif]

Mick wrote on Dec 11^th, 2013 at 8:09am:

Spence wrote on Dec 10th, 2013 at 8:46pm: Mick wrote on Dec 10th, 2013 at 7:32pm: lets see spill the beans... I'll bite That was a GMC safari 4.3 W  the other shop had put a MAF on it to try to cure the low power under load. The Y pipe leads into one and there is a pre cat and then a main cat, after telling them it needs a cat they asked which one is restricted,  I proved the rear one by attaching pressure gauges one before front cat and then another between both cats. If it was only the front cat restricted the left pressure gauge would have been the only one showing the high pressure. EDIT Added a better and smaller video file

So it needs all of them as the front cat now resides in the rear cat.   8-)

Mick wrote on Dec 11^th, 2013 at 5:42pm:

daveyK wrote on Dec 11th, 2013 at 1:13pm: somebody got an early Xmas present  ;D Everything you see is as old as the difference in age between you and me. :P No wait you and Spence. Its Rods addition to the Case Study Wizard program thats new, :) Even the boot in the video is old, Spence needs to take a look at that one for size.

Well at least that boot had a more squared off toe. Looks like it's been around the block a few times as well.   :)

My turn [smiley=dance.gif] [smiley=devious.gif]

---

Same video but inserted as a youtube link

http://www.youtube.com/watch?v=g-yavHPv6U0&feature=youtu.be

Rod I could see the problem as soon as the video started. The steering wheel is on the wrong side!  [smiley=laughing.gif]

rod_au wrote on Dec 11^th, 2013 at 6:59pm:

My turn [smiley=dance.gif] [smiley=devious.gif]

O show off! ;D

Ok I mastered how to attach the recording to an image tonight. :)

But after seeing your video now I have to master how to change the images whilst the audio continues. :'(

If you think I need assistance I will check down under later

---

daveyK wrote on Dec 11^th, 2013 at 6:07pm:

Mick, are talking about new toys, old shoes, or old timers?? I'm easily confused these days  [smiley=Grandpa_Angry.gif] I can't wait for your new posts with videos, that'll make for some   [smiley=huh2.gif]

I am trying :D

Spence wrote on Dec 11^th, 2013 at 6:39pm:

Mick wrote on Dec 11th, 2013 at 8:09am: Spence wrote on Dec 10th, 2013 at 8:46pm: Mick wrote on Dec 10th, 2013 at 7:32pm: lets see spill the beans... I'll bite That was a GMC safari 4.3 W  the other shop had put a MAF on it to try to cure the low power under load. The Y pipe leads into one and there is a pre cat and then a main cat, after telling them it needs a cat they asked which one is restricted,  I proved the rear one by attaching pressure gauges one before front cat and then another between both cats. If it was only the front cat restricted the left pressure gauge would have been the only one showing the high pressure. EDIT Added a better and smaller video file So it needs all of them as the front cat now resides in the rear cat.   8-)

I got the return call this afternoon :o it got an aftermarket  :( Y pipe cat assembly ::) But a big thank you for the diagnosis.

Spence wrote on Dec 11^th, 2013 at 7:23pm:

Rod I could see the problem as soon as the video started. The steering wheel is on the wrong side!

Not from where I am standing [smiley=smiley-gen101.gif]


Mick wrote on Dec 11^th, 2013 at 7:34pm:

But after seeing your video now I have to master how to change the images whilst the audio continues

My video is not one stream of audio. I create a new audio recording for each image then save them both to the playlist. I just stopped talking mid sentence and continued with the next image.

You must create an audio file for each image that you select.
Brad explains it here.
http://www.autonerdz.com/cgi/yabb2/YaBB.pl?num=1328239721/143#143

I am planning a major rework of the case study wizard soon. The new version of the case study wizard will have a storyboard that will allow you to use one audio file and attach multiple images. That should be easier for you , Mick ;)

Thanks Rod.
My first attempt.  :P

http://youtu.be/3T9mSUkQagk

http://www.youtube.com/watch?v=3T9mSUkQagk

Daniel wrote on Dec 12^th, 2013 at 5:56am:

Thanks Rod. My first attempt.  :P http://youtu.be/3T9mSUkQagk

Very nice Daniel  8-) did you mess up along the way like I did? :)

I even got a plug in there  ;)  :-*

Yes Mick.
I made all the pictures first, and then tried to ad voice. Ooops no go...  ::)

Good job, Daniel!
Thanks for sharing [smiley=thumbsup.gif]

Rod,
How do you make the video appear here as a player, like yours in reply #9, instead of just a link.?
I can't seem to get it to work.  :(

Select the 5th button from the left (Insert Media).
But, you cannot use the youtube short name.
If you open your video and copy and paste the video address it will look something like the image attached.


http://www.youtube.com/watch?v=3T9mSUkQagk&feature=youtu.be

---

Thanks a lot Rod.  :)
The only button I didn’t try.  ::)

One more made for our Danish Honda Blackbird club, about uploading pictures to the forum.  :)

http://www.youtube.com/watch?v=b2quIqgrX8Y&feature=youtu.be

Nice Job, Daniel!
It is good to see that you finding uses for the program.
Again, thanks for sharing. [smiley=thumbsup.gif]