User’s Comments

Autonerdz Events

Autonerdz Store

Contact Autonerdz

Autonerdz forums

	Welcome, Guest. Please Login or Register

The Autonerdz Community Forums › General Public Area › PicoScope › intermittent crank no start

‹ Previous Topic | Next Topic ›

Page Index Toggle

Pages: 1

Send Topic

Print

intermittent crank no start (Read 3,476 times)

fordman Guru Member Picogroup Offline Posts: 488 tulsa Oklahoma USA Gender:	intermittent crank no start Jun 29^th, 2013 at 8:57am i had noise on the crank sensor which would cause the scan tool to read a rpm signal but would not pulse injectors or the coils at times,about every 10 starts or so. the noise was only during cranking mode,runnung signal was clean,after investigation the starter was the cause of the noise
Back to top	edgecranksensor.jpg (99 KB \| 265 ) IP Logged

PRESTON LSD Guide Picogroup Offline "Fix like a champion today" Posts: 4,960 Jensen Beach Florida USA Gender:	Re: intermittent crank no start Reply #1 - Jun 30^th, 2013 at 4:53pm Got any captures of the starter system while cranking? Just out of curiosity.
Back to top	Rogue Nerd in South FL WWW IP Logged

fordman Guru Member Picogroup Offline Posts: 488 tulsa Oklahoma USA Gender:	Re: intermittent crank no start Reply #2 - Jun 30^th, 2013 at 6:32pm i have to dig in my files but i think i had some across the pos cable and ground they were noisy also if i find them i will post them
Back to top	IP Logged

PRESTON LSD Guide Picogroup Offline "Fix like a champion today" Posts: 4,960 Jensen Beach Florida USA Gender:	Re: intermittent crank no start Reply #3 - Jun 30^th, 2013 at 6:35pm Thanks
Back to top	Rogue Nerd in South FL WWW IP Logged

Page Index Toggle

Pages: 1

Send Topic

Print

‹ Previous Topic | Next Topic ›

Top of this page

The Autonerdz Community Forums » Powered by YaBB 2.5 AE!
YaBB Forum Software © 2000-2010. All Rights Reserved.

Valid XHTML

Valid CSS

Powered by Perl

Source Forge