20A/60A AC/DC (low amps) current clamp (TA018) (f/k/a PP264)

$133.00

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup.

SKU: TA018 Category:
20A/60A AC/DC (low amps) current clamp (TA018) (f/k/a PP264)

Description

The TA018 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.

The current clamp has two calibration settings, set by a slider switch on the handle of the probe.

  1. 1 mV/10 mA (100 mV = 1 A)
    — use this for testing currents up to 20 A.
  2. 1 mV/100 mA (10 mV = 1 A)
    — use this for testing current up to 60 A.

In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA018 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually under the packing code PP264.

Shipping

The cost of shipping will be calculated at checkout, this website will only accept orders within the U.S.

Sales tax will be charged where applicable.

We use United Parcel Service and United States Postal Service. All shipments are insured unless otherwise indicated.

Delivery will likely require a signature.

Customers outside North America:
We always recommend sourcing PicoScope locally, but you are welcome to contact us for a quote. The online shopping cart will not accept international orders. when contacting us, please list any items you are interested in along with a street address for an accurate quote. We will then email a quote and an invoice if you decide to proceed. We have a secure online credit card payment method for international orders, we also accept Paypal.

Specifications

Captured Conductor Size: 9 mm maximum.
Low Battery Indicator: Red LED lighting.
Operating Temperature: 0°C to 40°C, 70% R.H.
Storage Temperature: -20°C +70°C, 80% R.H.
Battery Type: 9V DC, NEDA 1604, 6F22, 006P.
Weight: 250 gm typical
Dimensions: 195mm (H) x 70mm (W) x 33mm (D).
Output: Cable with BNC plug.

ELECTRICAL (At 23± 5°C, 70% R.H. maximum )
Effective Measurement Range
1mV/10mA: 10mA to 20A DC or rms AC for 200mV range of the oscilloscope.
1mV/100mA: 10mA to 20A DC or rms AC for 200mV range of the oscilloscope.
20A to 60A DC or rms AC for 2V range of the oscilloscope.

Accuracy
System accuracy: Current clamp accuracy + DMM accuracy.

For example, if the measured conductor carries a 100mA current, set the current clamp to 1mV/10mA range to get an output signal of 10mV. Suppose the accuracy of the units is 2.0%, the tolerance limit should be between 10.20mV maximum and 9.80mV minimum.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Please login to post questions

You may also like…

(0)
About - Cart - Wishlist - Contact - My Account - Terms - Returns - PicoGroup Policy - Privacy Policy
Facebook YouTube
Alldata