The PicoDiagnostics NVH Kit from Pico Technology is the cost–effective answer to the many NVH problems facing technicians today. Providing real-time diagnosis to the technician in the form of either: a bar graph, a frequency chart, a 3D frequency chart, RPM order or road speed view. The ability to start the recording before a road test, and play back the recording for analysis on your return, ensures that driver attention remains on the road. Saving the recordings couldn’t be simpler: much like our other automotive software you simply save the file to your laptop’s hard drive.
The PicoDiagnostics NVH kit makes use of the PicoScope 3000 & 4000 Series Automotive oscilloscopes, and comes complete with everything (J2534 Scantool or VCI not supplied), you need. If you already have a PicoScope 3000 or 4000 Series Automotive oscilloscope, you’re halfway there.
A Separate J2534 Scantool or VCI can be used to provide RPM data, but is not included in the kit. The MongoosePro® will work with CAN and ISO 9141 protocol’s and is sold separately.
Full screen, high–resolution results are presented clearly and accurately
No external memory required– saves directly to laptop or PC
Record up to 500 seconds of data
Detects multiple vehicle vibrations
Customer report function
Plugs into your automotive PicoScope® (sold separately)
The NVH kit from Pico Technology requires an unlock key in order to allow your specific PicoScope to work with the NVH software, one key is included with each kit. This unlock key is limited to one PicoScope automotive scope and is not transferable.
PicoScope 3000 or 4000 Series Automotive oscilloscope required, not included.
This kit contains:
BNC cables connect the interface box to an Automotive PicoScope*. A USB cable connects your PicoScope to PC or laptop to run the PicoDiagnostics software. A Separate J2534 Scantool or VCI can be used to provide RPM data, but is not supplied.
Your PicoDiagnostics NVH Kit contains the following items:
- 2 – 3 output NVH interface units
- Mounting magnets for accelerometer
- Cable: insulated BNC to BNC 0.5 m blue
- Cable: insulated BNC to BNC 0.5 m red
- Cable: insulated BNC to BNC 0.5 m green
- Cable: insulated BNC to BNC 0.5 m yellow
- 2 – 3-axis Accelerometers
- 2 – Microphones
- 2 – Sensor extension cables for NVH interface unit
- Carry Case
Weight (Interface / Vibration Sensor / Microphone) 120 g / 80 g / 20 g
Dimensions: Sensor Interface (inc. BNCs) Microphone Magnet (inc. fitted grub screw) 105 mm x 65 mm x 27 mm 43 mm x 17 mm 12 mm x 18 mm
Sensor extension lead length 3 m
Battery (Lithium Primary Cell) CR123(A) 3 V (user replaceable)
Battery life (Shelf / Vibration mode / Microphone mode) 10 years / 6 months / 2 months
Maximum measurable acceleration ±5 g
Vibration frequency range (3 dB) DC to 350
Hz Shock survivability (accelerometer head) 10,000 g
Temperature range (operating) accelerometer head –40 °C to 85 °C
Thread mounting (accelerometer) ¼” x 28 UNF
Microphone sensitivity 45 mV/Pa, nominal, at 1 kHz EMC
approvals CE: Meets EN61326-1:2006
The cost of shipping will be calculated at checkout, this website will only accept orders within the U.S.
Sales tax will be charged where applicable.
We use United Parcel Service and United States Postal Service. All shipments are insured unless otherwise indicated.
Delivery will likely require a signature.
Customers outside North America:
We always recommend sourcing PicoScope locally, but you are welcome to contact us for a quote. The online shopping cart will not accept international orders. when contacting us, please list any items you are interested in along with a street address for an accurate quote. We will then email a quote and an invoice if you decide to proceed. We have a secure online credit card payment method for international orders, we also accept Paypal.
Only logged in customers who have purchased this product may leave a review.
There are no reviews yet.