PicoBNC+ 2000 A AC/DC current clamp (TA388)

PicoBNC+ 2000 A AC/DC current clamp (TA388)

$340.00

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup.

Add to wishlist
SKU: TA388 Category:
PicoBNC+ 2000 A AC/DC current clamp (TA388)

Description

The 2000 A current clamp allows you to measure up to 2000 amps without cutting, or disconnecting or stripping wires. Simply clamp the jaws around the cable to be tested and plug the clamp into your PicoScope.

The TA388 has a specification to match our popular TA167 200A/2000A clamp but fitted with a PicoBNC+ interface. The clamp can be auto-configured by PicoScope software when connected to the scope. Ranging is carried out automatically with no user switching required. The clamp is powered via the scope and therefore does not require any batteries. Additionally, the clamp is auto-zeroed whenever connected to the scope.

These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA388 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually but requires a PicoScope featuring the PicoBNC+ such as the 4225A or 4425A.

Shipping

The cost of shipping will be calculated at checkout, this website will only accept orders within the U.S.

Sales tax will be charged where applicable.

We use United Parcel Service and United States Postal Service. All shipments are insured unless otherwise indicated.

Delivery will likely require a signature.

Customers outside North America:
We always recommend sourcing PicoScope locally, but you are welcome to contact us for a quote. The online shopping cart will not accept international orders. when contacting us, please list any items you are interested in along with a street address for an accurate quote. We will then email a quote and an invoice if you decide to proceed. We have a secure online credit card payment method for international orders, we also accept Paypal.

Specifications
Model PicoBNC+ current clamp: 2000 A AC/DC
Physical
Combined length of lead and probe 2.85 m
Jaw size 32 mm diameter
Weight 320g
Electrical
Working current range ±2000 A DC or AC peak
Overload current 2200 A DC (for one minute)
Maximum voltage and CAT ratings 300 V
Hardware bandwidth 20 kHz
Temperature coefficient ±0.1% of reading / °C
Hardware Resolution ± 100 mA up to 200 A
± 500 mA above that
Accuracy 1% ± offset up to 1500 A
5% from 1500 A to 2000 A
Operating Temperature range 0 °C to 50 °C
Storage temperature range –20 °C to +85 °C
Operating humidity 15% to 85% (non-condensing)
Bandwidth Frequency range DC to 20 kHz (–1 dB)
Calibration / zero offset requirements On startup

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Related products

(0)
About - Cart - Wishlist - Contact - My Account - Terms - Returns - PicoGroup Policy - Privacy Policy
Facebook YouTube
Alldata